- Temperature range :-50-110 ?
- Dimensions: 48.5 * 40mm
- Temperature control mode: ON / OFF
- Resolution:When temperature is 0.1?, the resolution is -9.9~99.9, other temperature segment is 1?
- Control accuracy: 0.1 ?
- Hysteresis accuracy: 0.1?
- Refresh rate: 0.5S
- High temperature protection: 0-110?
- Supply voltage: DC 12V
- Static current: â‰?35MA, attract current â‰?65MA
- Output voltage: DC 12V
- Output power: 20A relay
- Measurement input: NTC (10K 0.5%) Waterproof Sensor
- Environmental requirements: -10 ~ 60 â„?,Humidity 20% -85%
Instructions for use:
Connect the power supply and equipment, the measuring temperature is displayed, press the “SET” button, press ” + or – ” to set the desired temperature (long press ” + or – ” to quickly increase or decrease), press “SET” to confirm the setting and return, controller
automatically performs the relay ON/OFF.the thermostat output is 10A relay, meet a variety of high-power loads,
LED Indicator: LED off indicates the relay off; Lighting,indicates the relay is closed.
Digital LED Tubes: “LL” indicates sensor open, “HH” indicates overrange, the relay will be forcibly disconnected; “—” indicates high temperature alarm
Long press the “SET” button to enter the main menu settings, press ” + or – ” to switching between P0-P6,then long press “SET” or 10 seconds without keystrokes to confirm the setting and return.
- P0 :Cooling / Heating; Range: C/H; Default: C
- P1 :Hysteresis Setting; Range:0.1-15; Default: 2
- P2 :Highest Setting Limit; Range:110; Default: 110
- P3: Lowest setting Limit; Range:-50; Default: -50
- P4 :Temperature Correction; Range:-7-7°c; Default: 0°c
- P5: Delay Start Time; Range:0-10 Minute; Default: 0
- P6: Key Tone Switch; Range:0-110; Default: Off
- When the Thermostat is power off, long press “- or +”, you can restore the factory settings
- 1 x -50-110°C W1209 Digital thermostat Temperature Control Switch 12V + sensor